BEFORE
YOU
BEGIN
10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
CONSOLE MAST
LOWER HANDLEBAR
PRE-ATTACHED
BOLT & WASHER
UPPER HANDLEBAR
PRE-ATTACHED
SET SCREWS
NOTCH
TAB
NOTE:
There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove
PRE-ATTACHED BOLT & WASHERS
from
CONSOLE MAST.
B) Slide
LOWER HANDLEBARS
onto
CONSOLE MAST
and attach by re-inserting
PRE-ATTACHED BOLT & WASHERS.
C) Slide
UPPER HANDLEBARS
onto
LOWER HANDLEBARS
and align
NOTCH
with
TAB
making sure handlebars are
joined together completely. Secure
UPPER HANDLEBARS
to
LOWER HANDLEBARS
using
PRE-ATTACHED SET
SCREWS
.
D) Snap the front and back
HANDLEBAR COVERS
together onto the
UPPER HANDLE BARS
.
Note the position of the snap tabs on the covers before snapping into position.
E) Repeat on other side.
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
ASSEMBLY
STEP
FRONT
HANDLEBAR
COVER
BACK
HANDLEBAR
COVER
UPPER
HANDLEBAR
LOWER
HANDLEBAR
Summary of Contents for LS 625E
Page 2: ......