BEFORE
YOU
BEGIN
10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
A) Open
HARDWARE BAG FOR STEP 3.
B) Remove
PRE-ATTACHED BOLT & WASHERS
from
CRANK.
C) Slide
PEDAL ARM
onto
CRANK
and attach by re-inserting
PRE-ATTACHED BOLT
and
WASHERS.
D) Repeat on the other side.
E) Attach the
PEDAL ARM COVER
to the right
PEDAL ARM
using 1
SCREW (F)
.
F) Repeat on the other side.
CRANK
PRE-ATTACHED BOLT AND WASHERS
SCREW (F)
PEDAL ARM COVER
PEDAL ARM
SCREW (F)
15 mm
Qty: 2
HARDWARE BAG FOR STEP CONTENTS :
ASSEMBLY
STEP
RIGHT HANDLEBAR
PRE-ATTACHED BOLT AND WASHERS
HANDLEBAR COVER
CONSOLE MAST
BOLT (G)
MULTI-POSITION HANDGRIPS
A) Open
HARDWARE BAG FOR STEP 4.
B) Attach the
MULTI-POSITION HANDGRIPS
to the right
HANDLEBAR
using 2
BOLTS (G)
.
C) Remove
PRE-ATTACHED BOLT & WASHERS
from
CONSOLE MAST.
D) Slide
RIGHT HANDLEBAR
onto
CONSOLE MAST
and attach by re-inserting
PRE-ATTACHED BOLT & WASHERS.
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
E) Snap
HANDLEBAR COVERS
together over the
RIGHT HANDLEBAR
. Note the position of the snap tabs on the
covers before snapping into position.
F) Repeat on other side.
WARNING
BOLT (G)
15 mm
Qty: 4
HARDWARE BAG FOR STEP CONTENTS :
EX-77_Rev.1.6.indd 10-11
7/1/08 8:17:43 AM
