BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
13
INTRODUCTION
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
IMPORT
ANT
PRECAUTIONS
ASSEMBLY
STEP
NOTE:
There is NO hardware bag for this step.
All hardware is pre-installed.
A) Attach the
CONSOLE MAST
wires to the
CONSOLE
wires .
B) Carefully tuck the
CONSOLE MAST
wires
into the
CONSOLE MAST
before attaching
the
CONSOLE
.
C) Attach
CONSOLE
to the
CONSOLE MAST
using the 4
PRE-ATTACHED SCREWS
(screws will have to be removed from the
console first).
DO NOT PINCH WIRES!
YOU’RE FINISHED!
NUT (E)
INSIDE DIAMETER:
8 mm
Qty: 2
BOLT (F)
60 mm
Qty: 2
SPACER (G)
44 mm
Qty: 2
TEFLON WASHER (H)
24 mm
Qty: 4
SCREW (L)
Qty: 2
HARDWARE BAG FOR STEP 5 CONTENTS :
CONSOLE
CONSOLE MAST
CONSOLE WIRES
PRE-ATTACHED
SCREWS
AC ADAPTOR INPUT
ASSEMBLY
STEP 5
(CONTINUED)
Connect
AC ADAPTOR
to the
AC ADAPTOR INPUT,
located at front of the main frame. Connect
ADAPTOR
to a power outlet. Locate the
ON / OFF
switch on the back of the
CONSOLE
. Flip the switch
to the
ON
position. After a “beep”, the
CONSOLE
will light up.
ASSEMBLY
STEP 6
WATER BOTTLE HOLDER
PRE-ATTACHED SCREWS
CONSOLE MAST
NOTE:
There is NO hardware bag for this step. All hardware is pre-installed.
A) Attach
WATER BOTTLE CAGE
to
CONSOLE MAST
using
PRE ATTACHED SCREWS.
LS_635E_User_Guide_Rev.1.2.indd 12-13
3/29/07 1:07:35 PM
