BEFORE
YOU
BEGIN
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
PRE-ATTACHED SCREW
HANDLEBAR COVERS
RIGHT HANDLEBAR
ASSEMBLY
STEP
A ) Open
HARDWARE BAG FOR STEP 8.
B) Attach the
OUTSIDE ELBOW COVER
to the elbow joint using 1
SCREW (L)
.
C) Snap the
INSIDE ELBOW COVER
onto the
OUTSIDE ELBOW COVER
. Note the position of the snap tabs before
snapping into position.
D) Repeat on other side.
NOTE:
There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove
PRE-ATTACHED SCREW
from the
RIGHT HANDLEBAR
.
B) Snap
HANDLEBAR COVERS
together over the
RIGHT HANDLEBAR
. Note the position of the snap tabs on the
covers before snapping into position.
C) Attach
HANDLEBAR COVERS
with
PRE-ATTACHED SCREW
.
D) Repeat on other side.
SCREW (L)
OUTSIDE ELBOW COVER
INSIDE ELBOW COVER
SCREW (L)
30 mm
Qty: 2
HARDWARE BAG FOR STEP CONTENTS :
E6_Rev.1.2.indd 14-15
8/7/06 4:43:39 PM
