11
10
SPEAKERS
CONSOLE FAN
WATER BOTTLE HOLDER
GRIP PULSE HANDLERAILS
ON/OFF SWITCH
POWER CORD
MAST BOOT
RUNNING BELT/RUNNING DECK
TRANSPORT WHEEL
FOOT LOCK LATCH DECAL
(UNDERNEATH FOOT LATCH)
TABLET/READING RACK
CONTROL PANEL AND DISPLAY WINDOWS
CONSOLE
SAFETY KEY PLACEMENT
CONSOLE MAST
FOOT LATCH (UNDERNEATH DECK)
FOR CENTERING THE BELT
MOTOR COVER
SIDE RAIL
ROLLER END CAP
REAR ROLLER
TENSION/ALIGNMENT BOLTS
CONSOLE JOINT COVER
CONSOLE JOINT COVER
CAUTION ATTENTION PRECAUCIÓN
KEEP HANDS AND FEET
AWAY FROM THIS AREA.
HIGH-PRESSURE SHOCKS
COULD
CAUSE BODILY INJURY.
GARDER LES MAINS ET
LES PIEDS LOIN DE
CETTE REGION. LES
AMORTISSEURS HAUTE
PRESSION PEUVENT
CAUSER DES BLESSURES
CORPORELLES.
MANTENGA LAS MANOS
Y LOS PIES ALEJADOS
DE ESTA ÁREA.
DESCARGAS DE ALTA
PRESIÓN PODRÍAN OCASIONAR
LESIONES FÍSICAS.
TOOLS INCLUDED:
F
6 mm T-Wrench
F
5 mm L-Wrench
PARTS INCLUDED:
F
1 Main Frame
F
1 Console Assembly
F
2 Console Masts
F
2 Console Mast Boots
F
1 Hardware Kit
F
1 Safety Key
F
1 Audio Adapter Cable
F
1 Bottle of Silicone Lubricant
(for 2 applications)
F
1 Power Cord
F
2 Console Joint Covers
F
2 Grip Pulse Handlerails
If you have questions or if there
are any missing parts, contact
Customer Tech Support.
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
packaging until specified to do so in the assembly instructions. You may remove the
plastic wrap from console masts.
WARNING
UNPACKING
Place the treadmill carton on a level flat surface. It is recommended that you place a
protective covering on your floor. Take CAUTION when handling and transporting this unit.
Never open box when it is on its side. Once the banding straps have been removed, do not
lift or transport this unit unless it is fully assembled and in the upright folded position, with
the lock latch secure. Unpack and assemble the unit where it will be used. The enclosed
treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never
grab hold of any portion of the incline frame and attempt to lift or move the treadmill.
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
WARNING
NEED HELP?
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such
as lithium bike grease is recommended.
PRE ASSEMBLY
