5
CHAPTER 2: ENGINEERING MODE
2.2 Engineering Mode – Overview
MODE
FUNCTION
DESCRIPTION
ENG 0
Display Test
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware Test
Motor & Incline Motor Test. Press START then SPEED UP or DOWN to
test the speed. Press INCLINE UP or DOWN to test the incline.
ENG 2
Auto Calibration
Auto calibrates the speed. The unit will return to normal operation if the
auto calibration passes.
ENG 3
Switch Function
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO
MODE off or on
(Demo on = 1 & Demo off = 0 in the TIME window).
Use the START key to select unit (1 = KM & 0 = Mile in the DISTANCE
window).
ENG 4
Information
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
Unit of Time is Hour.
Unit of Distance is KM or Mile based on your setting in ENG3.
SECOND
LEVEL
ENG 8
Software Version
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP
and INCLINE DOWN keys at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
*
Demo off
– The console will display Figure A
after the removal of the safety key.
*
Demo on
– 60 seconds after the removal of the safety key, the console will enter into DEMO ON MODE.
The LED and LCD will display in turns (Figure B).
FIGURE A
FIGURE B