horiba LAQUAact ES-71G, Instruction Manual

Page: 37 / 88

Conductivity measurement
17
■
Conductivity measurement
The conductivity cell can be used to measure the conductivity, salinity, TDS, and
resistivity of a sample. Salinity, TDS, and resistivity are calculated from the measured
value of conductivity.
Press the
key to select the measurement parameter (“ Changing the measurement
parameter ” (page 7)).
The basic steps are the same for all measurement parameters, however, some settings
and operations are only valid for specific measurement parameters. Select the settings
and perform the steps that show the mark of the parameter you want to measure.
< Examples >
: Perform for conductivity measurement.
: Perform for salinity measurement.
: Perform for resistivity measurement.
: Perform for all measurement parameters.