horiba LAQUA F-71G, Instruction Manual

Page: 38 / 102

Chapter 3 Basic Operation
3.2 Settings
20
3.2.3 Auto data memory setting
Data memory can be performed automatically at a
regular interval.
1.
Press the SET key on the measurement screen,
and press the
▲
or
▼
key to enter the auto data
memory setting screen.
2.
Press the ENTER key to enter the auto data
memory change screen.
3.
Press the or key to change ON or OFF, and
press the ENTER key.
4.
If you select ON, press the or key to select a
digit and press the
▲
or
▼
key to change the value,
and then press the ENTER key.
Setting range: 2 seconds to 24 hours
▲ ▼
▲ ▼