![background image](http://html1.mh-extra.com/html/horiba/checker-cc-100e/checker-cc-100e_operating-instructions-manual_2162287003.webp)
General notes
HORIBA
4/ 24
NOx Converter Checker CC-100E
1 General information
Copyright© 2021 HORIBA Europe GmbH, all rights reserved.
This manual describes the operation of the NOx Converter Checker CC-100E (with integrated ozone
generator), which can be used to check the efficiency of NOx-to-NO converters used in gas analysers
during emission measurements or for process gas analysis.
Be sure to read this manual before using the product to ensure proper and safe operation of the unit.
Keep the manual in a safe place so that it is always available when needed.
Product specifications and the appearance and contents of this manual are subject to change without
notice.
All procedures and illustrations described in this manual refer to a unit with specific features. Please note
that your unit may differ. If you have any questions, please contact us.
1.1 Address of the manufacturer
HORIBA Europe GmbHHans-Mess-Straße
661440 Oberursel / Germany
Phone: +49 6172 1396 0Fax:
+49 6172 137 385E-mail
:
[email protected]: www.horiba.com
1.2 Warranty and liability
The appliance is supplied by HORIBA with a warranty for a period of one (1) year.
In case of malfunction or damage within this year attributable to HORIBA, please contact HORIBA.
The warranty does not cover the following situations:
–
Any malfunction resulting from improper operation.
–
Any malfunction due to modifications or repairs not having been carried out or authorised by HORIBA.
–
Any malfunction due to the use of the unit in an unsuitable environment.
–
Any malfunction resulting from failure to observe the instructions in this operating manual.
–
Any malfunction resulting from use of the appliance that does not comply with the instructions in this
manual.
–
Any disruption resulting from natural disasters, accidents or breakdowns in which HORIBA is not
involved.
–
Any malfunction due to the unit falling down.
–
Signs of use such as rust etc. that are due to corrosion.
–
consumables and the replacement of wear parts.
HORIBA is not liable for any damage caused by any malfunction of this product, any deletion of data, or any
other use of this product.
1.3 Trademarks
In general, company and brand names are either registered trademarks or trademarks of the respective
companies.