manualshive.com logo in svg

horiba APMA-370, Operation Manual

Share
Download
horiba APMA-370 Operation Manual Download Page 68

6 FUNCTIONALITIES

56

6.5.5

Unit conversion factor

Press the [UNIT CONVERSION FACTOR] button on the MENU/SETTING screen. The UNIT
CONVERSION FACTOR screen will be displayed.

Fig. 70  UNIT CONVERSION FACTOR screen

For each measurement component, the current concentration and the conversion result by
applying the currently selected unit conversion factor are displayed. This screen shows the
current concentration in a different unit, and no setting on this screen affects the analog output
and others. 
The currently specified unit conversion factor is also displayed as a button.
To change the factor value, press the button of the factor to be changed (see " 

 Changing

the unit conversion factor" (page 57)).
The following key allows you to perform the following operations.

Current concentration

Unit conversion result 

Currently specified 

by using the currently specified 

unit conversion factor

unit conversion factor

[CLOSE]: 

Returns to the MENU/SETTING screen.

Summary of Contents for APMA-370












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands