horiba ABX MICROS ES60, User Manual

Page: 189 / 200

Maintenance & Troubleshooting
User Manual - RAB237AEN 7–41
6.2. Logs
◆
When the instrument detects an error, the status button turns orange and the error message is
displayed in the "
Logs " tab.
◆
To access the " Logs " tab:
1- Press " Maintenance menu " button ( Diag.7-27 ).
2- Press " Logs " tab.
◆
The log messages are sorted by category:
- See
6.2.1. Alarms logs, page 7-41 .
- See 6.2.2. Errors logs, page 7-42 .
- See 6.2.3. QC logs, page 7-47 .
- See 6.2.4. Maintenance logs, page 7-47 .
- See 6.2.5. Startup logs, page 7-47
6.2.1. Alarms logs
Diag.7-47 Maintenance menu button
Message Possible cause/Corrective action
Startup cycle failed
The cycle has not been able to be completely performed or no
result received or no previous result to display:
- Run a startup cycle by pressing the "
Startup " button.
Invalid startup cycle
The startup cycle has correctly carried out, but the result of
the blank cycle is out of acceptable limits or the delay
between 2 analyses (X hours adjustable) is exceeded or the
technician asks for a restart without Shutdown:
- Run a startup cycle by pressing the "
Startup " button.
Printing blank report failed
Print error or report generation error:
- Check if printer is on line. If not, switch it on.
- Check if there is enough paper. If not, See
3.6. Integrated
ticket printer paper changing, page 7-16 .
- Check printer settings (See Section 6, 4.3. Printer, page 6-7 ).
Analyser communication failed
A communication error with the analyser occurred:
- Run a startup cycle by pressing the "
Startup " button.
Analyser connection failed
Connection not initialized between analyser and application
(analyser do not answer or analyser version is not compatible
with the application version):
- Restart the instrument.
- Check version numbers (See
4.6. Version, page 7-30 ).
- Contact your local HORIBA ABX Technical Support
Representative for assistance.
Critical cycle error - Run a startup cycle by pressing the " Startup " button.
Application error
A software problem occurs during data saving or file opening
for example:
- Restart the instrument.
Reagent temperature error
A reagent is not at the operating temperature:
- Run a startup cycle by pressing the "
Startup " button.
- Replace the reagent or the pack.
See
4.2. Reagent management, page 7-21