Other settings
79
●
Transferring saved data to a PC
By using a serial cable to connect the instrument to a PC, you can transfer the saved
data to the PC and edit it (LAQUAact-PH120, LAQUAact-PH130 only). Connect the RS-
232C connector at the instrument side to the serial port on the PC.
To save and edit data, please download the software "FD-70" from our website after the
registration.
For details of how to use the "FD-70", refer to the "FD-70" instruction manual, which you
can download from our website as well.
The required PC specifications and recommended PC specifications for using the "FD-
70" are shown in the following table.
Note
・
If you are not using the RS-232C communication, close the connector cover tightly.
・
While using the RS-232C communication, the instrument is not dust-proof or waterproof.
Do not use the RS-232C communication in a dusty place or with wet hands.
Item
Required PC specifications
Recommended PC specifications
Memory
32 bit: 1 GB or more
64 bit: 2 GB or more
CPU
1 GHz or more
HDD free space
5 GB or more
10 GB or more
OS
Windows 7, Windows 8 (8.1), or Windows 10
Display
Super VGA (800 × 600) or more
Connector
Serial connector (D-Sub 9 pin)
