manualshive.com logo in svg

Horiba Scientific LAQUAact ES-71, Instruction Manual

Share
Download
Horiba Scientific LAQUAact ES-71 Instruction Manual Download Page 21

Names of each part

ES-71

5

●

Operation key

Key

Name

Function

MEAS key

Changes the operation mode to the measurement mode 
during operation in a different mode. The changes you 
made using the setting mode are reflected when you press 
this key to return to the measurement mode.
In the measurement mode, switches the automatic hold 
measurement on/off.

CAL key

Changes from the measurement mode to the calibration 
mode.
Start calibration in the calibration mode.

DATA key

Changes from the measurement mode to the data mode.

SET key

Changes from the measurement mode to the setting mode.

POWER key

Turns ON/OFF the power of instrument.

MODE key

In the measurement mode, changes measurement 
parameters.

LIGHT key

Turns on/off the backlight.

ENTER key

Determines the selection or setting.
Prints data in measurement, the calibration and data mode.

UP key

Changes the selected item.
Changes the number of the selected digit when entering 
numbers.

DOWN key

LEFT key

Changes the selected item.
Changes the selected digit when entering numbers.

RIGHT key

Summary of Contents for LAQUAact ES-71



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands