15
be used for Ethernet connection.
Do not connect the RJ45 port to the phone line
2.2 SFP Port connection
PS3024S SFP port only support Gigabit fiber module.
Recommended use of standard SFP module products
The process of installing a fiber module on a switch is as
follows:
1、grasp the optic fiber module from the side, insert it
smoothly along the SFP port slot until the optic fiber module
and switch are in close contact;
2、confirm the Rx and Tx ports of the fiber module when
connecting, insert one end of the fiber into the Rx and Tx
ports correspondingly, ensure that the Tx and Rx ends of the
interface are connected correctly and the other end of the
fiber is connected to another device;
3、 please check the corresponding indicator light status
after power on. If the light blinking that the link is properly
connected, if the light is off , the link is failure, please check
the line to confirm that the corresponding equipment is
enabled.