14
Chapter2 Hardware connection
2.1 RJ45 port connection
Connect the RJ45 port of the switch and the corresponding
network device via cables, the POE power supply function of the
switch is default enabled on the downlink port of the switch,
which can be used for IEEE802.3af or IEEE802.3at standards
powered devices such as APs, bridges, and network cameras
Note：
When the switch connected workstations, servers, routers or
other ethernet devices the cable length should be within 100
meters;
The Auto-MDI / MDIX ethernet interface is enabled by default.
Category 5,the standard network cable or crossover cable can