Language :
en
Revision :
005
Page :
8
Low-pressure water
refilling system
FNC
© 2012, Hoppecke Batterie Systeme GmbH, all rights reserved.
Filling up the battery with distilled water
4.1
Prior to Filling
Figure 6: Connecting the waterfilling cart
1: Battery
2: Ventilation valve
3: Filter
4: Water tank
5: Pilot lamp
Before refilling distilled water, check the electrolyte levels. Refer to the battery
system's project-specific documentation for instructions
Ensure that the battery of the waterfilling cart is charged (LED 5 lights up in green
colour).
The storage tank must be filled up sufficiently.
The residual water tank must be empty.
1. Detach the flame arrestor from the battery.
2. Connect both the hose pipes of the waterfilling cart to the battery using the quick
couplers.
Caution:
Disconnect the waterfilling cart from the mains supply; it should not be
connected to the mains during the filling operation.
