15
14
♥
Why does my blood pressure
fluctuate throughout the day?
1.
Individual blood pressure readings can naturally
vary throughout the day, so for the best accuracy,
take your readings the same way each time. (See
Tips for Accuracy
on page 6.)
2.
Blood pressure readings can fluctuate if you are
taking medications.
2.
If you are taking multiple readings, wait at least 3
minutes between readings for best accuracy.
TROUBLESHOOTING
ABOUT BLOOD PRESSURE
When taking your blood
pressure at home you
should always make sure
the cuff is fastened and
placed properly, and that
the cuff is not too tight or
too loose.
Make sure you are not
overly anxious or stressed
as this will elevate your
readings. It is recommended
to take 2-3 deep breaths
before beginning to take
your blood pressure.
♥
Why is the reading I get from
a healthcare provider different
from the ones I take at home?
Your blood pressure can be different even during a
24 hour period because of factors like the weather,
emotional state, recent exercise or exertion, etc.
Your readings may be elevated in a healthcare set-
ting because of anxiety caused by the “white coat
effect” and you may get lower readings at home
where you are calmer.
♥
Which arm should I use to
take my blood pressure?
Blood pressure readings can be taken on either the right
or left arm, but it is recommended to take readings using
the
left arm
. Consult your physician if you think you
need to use your right arm instead. Whichever arm you
use, it is important to take your blood pressure using the
same arm every time you take a reading.
This section includes a list of error messages and frequently asked
questions for problems you may encounter with your blood pressure
monitor. If this product is not operating as you think it should, please
check here before arranging for service.
PROBLEM
SYMPTOM
CHECK THIS
REMEDY
No Power
Display is dim or
will not light up
Are the batteries dead?
Replace with new batteries.
Are the batteries
inserted correctly?
Insert the batteries
correctly.
Low
Batteries
+Lo
Shows
on the display
Are the batteries low?
Replace with new batteries.
Error
Message
“E 1” Shows on
the display
The monitor detected
that the cuff is not
secure
Refasten the cuff and take
a new reading.
“E 2” Shows on
the display
The monitor detected
that the cuff is too tight
Refasten the cuff and take
a new reading.
“E 3” Shows on
the display
The monitor detected
that the pressure of the
cuff is in excess
Relax for a moment and
then take a new reading.
“E 10” or
“E 11” Shows on
the display
The monitor detected
motion while measuring
Movement can affect the
measurement. Relax for a
moment and then take a
new reading. Try to remain
still for the second reading.
“EEXX” Shows
on the display
A calibration error
occurred
Take a new reading. If the
problem persists, contact
customer service for further
assistance. Refer to page
17 for warranty and contact
information.
