9
8
RECORDED MEASUREMENTS
MEASUREMENT
♥
Start the Measurement
The monitor will adjust to zero automatically, then
inflate and begin the measurement automatically.
1.
Press the “START/STOP” button to turn on the monitor,
and it will complete the whole measurement automatically.
2.
Press the “START/STOP” button to power off the monitor,
otherwise it will automatically turn off within 1 minute.
♥
Recalling Recorded Measurements
1.
Press the “MEM” button to
display the average of the records.
2.
Press either the “MEM”
button or the “SET” button to
toggle between the records.
The order of the record, date,
and time will display alternately.
The most recent record is shown first. Each new measurement is assigned to the
first (1) record. All other records are pushed back one digit (e.g., 2 becomes 3, and so
on), and the last record is dropped from the list.
CAUTION
!
The corresponding date
was the 5th of January
The corresponding time
was 10:38 AM
The monitor will display and save the results
automatically.
The Level Indicator Light next to the “START/
STOP” button will display a color corresponding
with the category of your reading. For more about
blood pressure levels, see page 13.
GREEN
YELLOW
RED
Optimal & Normal
(lower than SYS 140 & DIA 90)
Mild Hypertension
(SYS 140-159 & DIA 90-99)
Moderate to
Severe Hypertension
(higher than SYS 160 & DIA 100)
Blood Pressure Level Indicator Light Colors
