User Manual
22
3.
Before hanging the inverter, please confirm that the bearing range meets the requirements;
4.
Hang the inverter on the hanging plate and fasten the connecting plate and inverter from both
sides with 4 PCS M8 screws (supplied accessories);
5.
The installation process ends and the actual effect is as shown below:
Figure 3-5 String inverter screw mounting diagram
3.5.3 Bracket Mounting
This type of mounting allows the inverter to be mounted on a load-bearing wall or bracket. If you need to
install the wall, please purchase the M8 expansion nails on the wall according to the installation environment
and wall load.
Installation steps
1.
Take out the hanging plate in the package and confirm the front, back, and top of the hanging
plate;
2.
If necessary, punch holes in the wall or bracket according to the size of the mounting hole of
the hanging plate;
3.
Wall mounting: Fasten the mounting plate to the wall using 4 PCS M8 expansion pins;
4.
Bracket mounting: Fasten the mounting plate to the bracket using 4 PCS M8 screws (supplied
accessories);
5.
Before mounting the inverter, please ensure that the installation surface is strong and meets
the load-bearing requirements;
6.
Hang the inverter on the hanging plate and fasten the connecting plate and inverter from both
sides with M8 screws (supplied accessories);
7.
The installation process ends and the actual effect is as shown below:
Figure 3-6 String inverter wall mounting diagram
