11
In order to prevent damage to this
instrument, please avoid vibration
and collision during handling and use.
Pay special attention to the collision
caused by falling.
Do not connect measuring terminals
to
EX.I/O
terminals
and
communication terminals to avoid
damage to this instrument.
Use of test leads and cables
For safety reasons, the original test
line or test line selection should be
used when testing.
To avoid damaging the cables, do not
bend or pull the base of cables and
the leads.
The front end probe of the test leads
are sharp and careful not to be
scratched.
To avoid damage to the test leads,
when plug/pull the test line, don’t
hold the cable but connector.
