![background image](http://html1.mh-extra.com/html/hope-industrial-systems/his-ml17-c-series/his-ml17-c-series_user-manual_2161802010.webp)
10
Installation using yoke and pedestal mounting option
1. Prepare the mounting surface for installation of the pedestal by referring to the illustra-
tion.
2. Install the pedestal using appropriate hardware and methods for the mounting sur-
face selected taking strength, cable routing and sealing into
consideration.
3. Position and support the yoke assembly near the top of the pe-
destal.
4. Thread monitor cables through the yoke assembly (the ends of
the cables opposite the cover plate that joins to the monitor).
5. Connect all cables from the monitor into the pedestal.
Connec-
tors that do not have a locking mechanism should be sheathed
in heat shrink tubing or tie wrapped to insure that they do not
come loose inside the pedestal.
6. Feed all connectors and excess cabling inside the top of the
pedestal.
7. Feed all cables into the space available inside
pedestal.
8. Install pedestal top plate using the four ¼-20 x ¾”
long screws provided.
Access to the screws is
gained by the clearance notches in the yoke.
9. Feed remaining cable into the pedestal and screw the conduit elbow onto the top of the
pedestal taking care to position the direction of the conduit to allow free tilting of the
monitor without interference.
Conduit elbow will pivot somewhat even after pipe nut is
tightened.
10. Install monitor onto yoke with the Yoke Hardware Installation Guide provided.
11. Install cables into the monitor securing video cable and touch serial cable with screw-
locks.
12. Remove and reuse screws to install cover plate onto monitor. Tighten all eight screws
of cover plate fully then back off one full turn.