2
GETTING TO kNOw yOUR ClEANER
A. Cleaner main body
B. Carry handle
C. Dust Container
D. Dust Container handle and latch
E. On/Off Button
F.
Cord Rewind Button
G.
Filter Door
H. Filter Door latch
I.
Pre-Motor Filter Pack
J.
Exhaust Filter Door
K. Exhaust Filter
L.
Parking slot
M. Handle*
N. suction Control*
O. Telescopic Tube*
P. Telescopic Tube Adjuster*
Q. Carpet and Floor nozzle(
GP
)**
R. surface selector
s. Hose
T.
Accessories*
U. Pet Hair Remover Mini Turbo Nozzle*
V. Allergen Remover Mini Turbo Nozzle*
W. Turbo Nozzle*
X.
Parquet Nozzle*
ASSEmblING yOUR ClEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the two buttons on the hose end and pull.
[2]
2. Connect the tube upper end to the hose handle and store the accessories on the
handle.
[3]
3.
Connect the tube lower end to the carpet and floor nozzle**.
[4]
*Certain models Only
** Certain models only, nozzles may vary according to model
Q1. Carpet Nozzle (
CA
)**
Q2. Hard Floor Nozzle (
HF
)**
USING yOUR ClEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker.
[5]
2. Adjust the telescopic tube to the desired height by holding the handle and moving
the telescopic tube adjuster up or down.
[6]
3. select carpet care control height by pressing the pedal in the nozzle.
[7]
Hard Floor – Brushes are lowered to protect the floor.
Carpet – Brushes are raised for the deepest clean.
4. switch the cleaner on by pressing the On/Off Button on the cleaner main body.
[8]
5. Adjust the suction by sliding the suction control to the desired level.
[9]
6. switch off at the end of use by pressing the On/Off Button. Unplug and press the
cord rewind button to wind the power cord back into the cleaner.
[10]
7. To store your cleaner adjust telescopic tube to the lowest height setting and park the
nozzle in the park position on the cleaner main body.
[11]
ACCESSORIES
To obtain the best performance and energy efficiency
#1
it is recommended that the
correct nozzles are used for the main cleaning operations. These nozzles are indicated
in the diagrams by the letters
GP
,
HF
or
CA
.
A nozzle type
GP
can be used to clean both carpet and hard floor.
A nozzle type
HF
is suitable for use only on hard floor.
A nozzle of type
CA
is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended
for occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as re-
quired by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaner is not suitable for use on hard floors.
#1
NOTE:
Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
All accessories can be fitted to the end of the handle or the end of the telescopic tube.
3 in 1 tool*
– Combines several functions in one, with maximum flexibility by the rotating
body. Reach into awkward areas by rotating the body. The 3 in 1 tool can be stored neatly
