EMPTYing THE Bin
Hold the container over
the bin and press the
easy open button.
The bin door will open
and you can empty into a
bin with no dust contact.
Once emptied, gently tap
or shake the container to
release any excess dust
from the filters.
Do not overfill the bin
above the max level line.
2
43
To remove the bin from the cleaner press the
bin release button.
1
CLEaning THE PrE MOTOr FiLTErS
Rotate the upper part of the dust bin to open.
1
Remove the filter assembly from the bin top by
rotating the filter. It is advisable to wash the filters
after every 5 bin empties.
2
Remove the mesh frame from the filter,
then gently tap both filters to release
any excess dust.
3
Wash both filter and protective mesh under warm
water until the water runs clean. Remove excess
water by shaking and leave to dry for 24 hours.
Reassemble and refit filters to cleaner, only when
they are completely dry.
4
CLEaning THE EXHaUST FiLTEr
The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust grille.
Remove filter and wash with warm water.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
!
iMPOrTanT!
Ensure the mesh frame is
reassembled to the filter before use
- 6 -
Summary of Contents for VR81-HU01001
Page 1: ...USER MANUAL...
