PrEParing YOUr CLEanEr
SUPPLY COrD
Insert the main handle in the cleaner body
and then fix it with the screw provided.
Do not run over the supply
cord.
Clip the supply cord in the cord
clip at the back of the handle
to avoid accidentally running
the cleaner over the cord and
causing any damage.
Assemble the mini turbo brush holder to the
cleaner,then put the mini turbo bush to the
holder*.
CarPET CarE COnTrOL SELECTOr
Mini TUrBO BrUSH aSSEMBLY*
The carpet care control selector raises and lowers
the height of the nozzle.
CLEanEr rELEaSE
Unlock the cleaner by pressing down on the left
pedal with your foot.
POWEr SWiTCH
To switch the cleaner on or off press down on the right
pedal with your foot.
- 4 -
3
4
1
2
5
* Certain models only
RELEASE
Ensure that the cleaner is in the upright (parked)
position and move the selector to the required
setting for the carpet type or floor covering.
To obtain the best performance and energy
efficiency
#1
it is recommended that the adjustment
setting position
1
is used for the main cleaning
operations. The other adjustment settings are
for ease of use, use on longer pile carpets, or for
specialist cleaning tasks.
Settings
1.
Best performance and energy efficiency, short to
medium pile carpets, hard wooden floors, wooden
floor boards with crevices, ceramic tiles.
2.
Medium pile carpets, delicate floor coverings
such as vinyl or linoleum, parquet flooring.
3 or 4.
For longer pile carpets the motion
resistance may increase. Use these intermediate
settings to reduce the force required to push the
vacuum cleaner.
5.
Luxury carpet and Tool mode
iMPOrTanT:
Using this cleaner for loop pile
carpets with pile greater than 30mm is not
recommended. Please consult the floorcare/carpet
manufacturer’s recommended cleaning instruction
before vacuuming.
iMPOrTanT:
When cleaning delicate hard floors
such as vinyl or linoleum the selector switch must
be moved to position
2.
Failure to do so may cause
damage to the floor surface.
This vacuum cleaner is supplied with an Energy
Label as required by European Regulation (EU)
665/2013. If the label shows a red prohibition circle
on the right covering the hard floor symbol, then this
indicates that the vacuum cleaner is not suitable for
use on hard floors.
#1
nOTE:
Dust pick up ability carpet, dust pick up
ability hard floor, and energy efficiency in accord with
Commission Regulations (EU) 665/2013 and (EU)
666/2013.
Summary of Contents for VR81-HU01001
Page 1: ...USER MANUAL...
