P
Q
R
S
3-17
Remove lens -
Disconnect clean-
er from electrical outlet.
Insert a flat screwdriver into slot and
press down on tab. Remove lens.
Replace lens -
Snap lens into
place.
3-16
3-15
10
Secondary and final
filters
The secondary and final filters are locat-
ed under the exhaust cover in the bot-
tom of the cleaner cavity. The secondary
filter protects the motor from dirt parti-
cles and the final filter assists in return-
ing clean air to the room.
Cleaning filters
Disconnect cleaner from electrical
outlet.
Remove dirt cup (Fig. 3-2). Remove
screw and lift off exhaust cover (P).
Lift out final filter (Q).
3-14
Llift off exhaust plate (R) and remove
secondary filter (S).
Hand wash both filters in cold water and
mild detergent and
air dry
.
Reposition DRY secondary filter, exhaust
plate, final filter, exhaust cover and
screw.
Replace dirt cup.
To replace the filters, ask for the follow-
ing:
Secondary
filter:
HOOVER part no.
59153029
Final
filter:
HOOVER part no. 59153028.
Headlight replacement
What to buy
This cleaner uses a 12 volt, wedge base
type 912 bulb,
HOOVER part No.
27313107.
Install bulb -
Pull old bulb straight
out of socket. Push new bulb straight
into socket until locked in place.
Excessive force is not required.
3-13
