6
5
Deluxe nozzle
Lock brushes to clean bare floors
by sliding selector toward BARE
FLOOR. Release brushes to clean
rugs or carpet by sliding selector
toward RUG.
Deluxe wheeled
nozzle
Lock brushes to clean bare floors
by depressing selector to BARE
FLOOR. Release brushes to
clean rugs or carpet by depress-
ing selector to RUG.
C. Attach hose
and tool
6. Loop hose over hose hook and
position tool into holder on other
side of cleaner body.
LATCH
HOSE HOOK
HOLDER
(some models)
SELECTOR
SELECTOR
RIB
HOSE CONNECTOR
HOLDER
B. Attach nozzle
ON-OFF/Speed se-
lector switch
Your cleaner has a one or two
speed motor.
Use the
one speed
model for
cleaning any type of rug or bare
floor;
ON=I, OFF=0
Use the
two speed
model on
High (II)
for cleaning rugs and
carpet, or press switch to
Low (l)
for bare floors;
OFF=0
Rug and floor nozzle
The combination rug and floor nozzle has been designed to do an efficient
cleaning job on both carpet and hard surface floors.
Some models come with the standard nozzle. Others come with the deluxe
nozzle or with the deluxe wheeled nozzle. All nozzles have constant edge
cleaning for cleaning along baseboards or solid furniture. Both deluxe
nozzles have a BARE FLOOR setting and a RUG setting. To change from
one setting to the other, refer to the directions below for your deluxe nozzle.
4. Line up raised rib on front of
nozzle with raised rib just above
opening on cleaner. Push nozzle
securely into cleaner.
5. Facing the back of the cleaner,
position hose connector into holder
on right side of cleaner body
making sure latch is inside holder.
Operate cleaner only at voltage specified on data plate located on back
of cleaner motor housing.
How to use
To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
Plug cord into electrical outlet. Your cleaner is now ready to operate.
II = HIGH
0 = OFF
I = LOW
