Hoover SteamVac F5807 Owner'S Manual Download Page 2

2

WARNING:

To reduce the risk of fire, electric
shock, or injury:

When using an electrical appliance, always follow

basic precaution, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

Important Safeguards!

Questions or Concerns?

The Hoover Company wants to quickly resolve any
concerns about your cleaner or questions regard-
ing its use.  Look on the list provided with the
product for your local

 Hoover Factory Service

Center 

or in the Yellow Pages under “Vacuum

Cleaners - Household” for the nearest

 Authorized

Hoover Warranty Service Dealer 

(Depot) or call:

1-800-944-9200 

for an automated referral

of authorized service outlet locations (U.S. only) or

1-330-499-9499 (U.S.) or 1-800-263-6376

(Canada) to speak with a Hoover representative.

PLEASE DO NOT RETURN THIS PRODUCT
TO THE STORE OR SEND IT TO NORTH
CANTON FOR SERVICE.

Unpacking

L

C D

E

F

H

G

I

A

• Use indoors only.
• Use only on surfaces moistened by the cleaning process or small

spills.  Do not immerse product.

• Connect to a properly grounded outlet only.  See “Grounding Instruc-

tions”.

• Do not clean over floor electrical outlets.
• Do not use without tanks in place.
• Use extra care when cleaning on stairs.  Do not place carpet cleaning

machine on stairs.

• Use deep cleaner only for its intended use as described in

the instructions.  Use only attachments recommended by The Hoover
Company; others may cause hazards.

• The use of an extension cord is not recommended.  If an extension

cord is absolutely necessary, use at least a 16 gauge 3-wire cord which
has a 3-prong grounding type plug and a 3-pole receptacle that accepts
the machine plug.

• Unplug deep cleaner when not in use.  Turn off all controls

before unplugging.

• Always disconnect cord from electrical outlet before servicing the

deep cleaner.

• Do not unplug by pulling on cord.  To unplug, grasp the plug, not the

cord.  Never handle plug or appliance with wet hands.

• Do not pull or carry by cord, use cord as a handle, close door on cord or

pull cord around sharp edges or corners.  Do not run appliance over
cord.  Keep cord away from heated surfaces.

• Do not use with damaged cord or plug.  If appliance is not working as it

should, has been dropped, damaged, left outdoors, or dropped into
water, take it to a Hoover Factory Service Center or Authorized Hoover
Warranty Service Dealer.

• Close supervision is necessary when any appliance is used by or

near children.  Do not allow deep cleaner to be used as a toy or to run
unattended at any time.

• Do not point stair/upholstery tool toward people or pets.
• To assist in reducing drying time, be certain the area is well ventilated

when using detergents and other cleaners with this machine.

• Keep detergents and other cleaners out of children’s reach.
• Do not use to pick up flammable or combustible liquids such as gaso-

line or use in areas where they may be present.

• Do not pick up chlorine bleach, drain cleaner, gasoline or any other

toxic material with this appliance.

• Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

• Avoid picking up hard, sharp objects with the deep cleaner.

They may damage the machine.

• Keep hair, loose clothing, fingers, feet and all parts of body away

from openings and moving parts.

• Do not put any object into openings.  Do not use with any opening

blocked; keep free of dust, lint, hair, and anything that may reduce
air flow.

• To help prevent matting and resoiling, avoid contact with carpets until

they are dry.  Keep children and pets away from carpets until they are
completely dry.

• Store in a dry place.  Do not expose machine to freezing temperatures.

J

Unpack deep cleaner from the carton and
identify the parts shown.  Remove and dispose
of the  packing.

B

B

A. Deep cleaner
B. Upper handle    OR

Upper handle with hose/nozzle rack*

C. Bolts (2)
D. Nuts (3 - one extra included)
E. Carpet/Upholstery Detergent
F. Bare Floor Cleaner*
G. PreCleaner*
H. Bare floor attachment*
I.

Hose*

J.  Stair/upholstery nozzle*
K. Lower hose hook and screw*
L.  Nozzle clean-out tool*

*Included with some models.

SteamVac™ Deep Cleaner cleans carpet
fibers by applying hot tap water and
cleaning solution.

Save these instructions!

Safeguards - Unpacking - Assembly

K

J

Summary of Contents for SteamVac F5807















Reviews: