2. How to use
The assembled carpet cleaner will look like the drawing.
Model with SpinScrub™ hand tool is shown.
2-1
1. Hand grip
2. Solution trigger:
press to release cleaning
solution
3. ON/OFF switch
4. Wash/Rinse switch
5. SpinScrub™ hand tool
(not included with all
models)
6. Carrying handle
7. Clean water tank handle
8. Clean water tank
9. Detergent container
10.
Recovery tank handle
11. Recovery tank:
holds dirty solution
12.
Recovery tank latches
13. SpinScrub mode selector
14.
Solution tube connection port
15. Edge cleaners:
provided on both sides of nozzle
to remove dirt near baseboards.
16.
Nozzle
17. Hose connection port
18.
Cord hook:
rotates for quick cord release
19. Hose
20. Hose/tool caddy
21. Stair/upholstery nozzle
22. Bare floor tool
(available at additional cost if
not included with your cleaner)
23. Cord/hose hook
24. Handle release pedal
This carpet cleaner is intended for household use.
Operate carpet cleaner only at voltage specified on data
plate on back of cleaner. Plug carpet cleaner into a properly
grounded outlet.
1
2
4
5
8
6
3
7
9
10
11
12
13
15
14
16
19
17
18
23
20
22
24
21
Cleaner Description
6
1-18
Pull tool down and outward.
To reposition the tool, reverse this procedure.
1-19
How to reattach tool
cover
The tool cover is designed with a break-away
feature which allows it to snap free if it is
pushed open too far.
To reattach, align hinges of cover with holes
on sides of tool storage area. Snap door into
place.
