To achieve a high lustre finish
Attach felt buffing pads over scrubbing-waxing-polishing brushes using
fasteners. Polish to a soft shine by guiding shampoo polisher in straight lines
or with the grain of the wood. If more shine is desired proceed to step
2.
2. Remove felt buffing pads and attach high lustre polishing pads
(available at additional cost). Once again, guide the handle in straight
lines or with the grain of the wood to achieve a high lustre finish.
To keep floors bright and shiny
Floor should be buffed frequently to restore sheen and remove scratches
and marks. This lengthens the time between waxings. Before buffing,
use a vacuum cleaner to remove dust and dirt and damp cloth to remove
sticky particles. Stubborn spots, such as black heel marks, can be
removed by rubbing gently with very fine steel wool dampened with
wax.
If traffic areas need to be rewaxed and polished, and a solvent-base wax
has been used on the floor, apply wax only to these areas then buff the
entire floor.
Maintenance
The following section is concerned with proper maintenance. Familiarize
. .
yourself with-these home maintenance tasks and keep this owner’s
manual in a convenient place where you can refer to it when needed.
Proper use and care will assure continued cleaning effectiveness.
Splash guard
Wipe splash guard with dry cleaning fluid or liquid soap to remove wax
and dirt after each use.
Tank and tubing
Wash and rinse tank after each
use. Occasionally unscrew the
cap on the bottom of the tank
and rinse cap with clear water to
prevent clogging of the opening.
Remove tubing occasionally to
wash and rinse.
15
