Hoover Robo.com3 User Manual Download Page 9

Page: 9 / 14

* Certain Models only ** May vary according to model

is displayed. Press the OK confirmation button to confirm.
4. The minute display will flash. Press the up and down arrow on the remote control until the correct
minute is displayed. Press the OK confirmation button to confirm.

5. Day and time are now set.

With Wi-Fi Application*

Following the instruction in the wi-Fi Application*.

Note: the date will be automatically updated according to your smartphone once you connect

to your robo.com³ with the APP in your smartphone.

CLeANiNG ProGrAMs

Robo.com³ use AAI™ Infrared Navigation, an advanced navigation system that uses the algorithmic

calculation to define the best path to efficiently clean your room.

with the dust sensor, on dust detection the Robo.com³ will automatically initiate a cleaning cycle and
will follow an elliptical pattern.

you can activate the automatic cleaning mode by: [Fig.11]

1) Press the AUTO Sensitive touch control on Robo.com³
2) Press the AUTO button on the remote control
3) Following the instruction in the wi-Fi Application*.
Robo.com³ will automatically choose the best cleaning mode to clean your room. It will use 4 different
cleaning patterns:

Note:

You can reset the wi-Fi setting, by pressing the AUTO button on the main product for 4

seconds. Once reset, you can will hear a ring tone.
ZIg ZAg EDgE ELLIPTICAL SQUARE

you can activate the sPot cleaning mode by: [Fig.12]

1) Press the Sensitive touch control on Robo.com³

2) Press the button on the remote control

3) Press the SPOT button on the APP menu.

Use this mode to intensively clean a confined area. Robo.com³ will move following a elliptical pattern,

where the radius will continuously increase.

with the remote control, or wi-Fi application, you can also activate all the other cleaning programs:

[Fig.13, 14]

Manual Navigation:

The Robo.com³ can be controlled manually at any time during a cleaning program. The navigation

arrow buttons in the remote control / wi-Fi application* will move the Robo.com³ in the desired

direction with the suction activated. with the remote control, or wi-Fi application the Robo.com³ can be

controlled up to a long distance, even behind a wall.

FULL & Go:

Press the FULL & gO button on the remote control or wi-Fi application* to make Robot return to the
base. On the display the FULL & gO indicator will be illuminated. After being fully charged Robo.com³
will automatically start cleaning for one cycle and the FULL & gO option will be reset.

turbo option: oN / oFF

You can switch on or off the turbo mode by:
1) Press the TURBO button on remote control
2) Press the TURBO button on the APP menu.
The turbo option is illuminated when turbo is on, and Robo.com³ will work on turbo speed. Robo.com³ will start
to work at a faster speed, covering quicker the area to clean. Otherwise Robo.com³ will work on normal speed

scheduled Cleaning:

You can decide what time the Robo.com³ will start cleaning, daily or weekly. To set a cleaning
schedule follow see ‘setting Up the Cleaning Schedule’.

settiNG UP tHe CLeANiNG sCHeDULe
With remote control

The Robo.com³ can be programmed to automatically clean each day or on specific days as desired.

Once set up this will occur at the same time on each day specified. To set up a cleaning schedule over

one week complete the following:

1. Press the scheduling function button on the remote control. A flashing box will appear around M (Monday).

2. Use the up and down arrow buttons to select the desired day and then press the OK confirmation

button to confirm that day. You can also choose multiple days(up to 7days).

3. Once each day of the week has been selected, you can decide the hour of the cleaning schedule:

the hour will start flashing on the display. Use the up and down arrow keys to select the desired hour.

Press the OK confirmation button.

4. The minute display will flash, use the up and down arrow keys to select the desired minute. Press

the OK confirmation button.