10
9
MAINTENANCE
Is there an accessory missing?
• Check the ‘This pack contains’ panel on the box to make sure the part is included with your machine.
Why won’t my pressure washer turn on?
• Make sure the on/off switch is set to the ‘I’ position.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse.
• Check if your RCD has been tripped, if it has tripped, reset it.
• The power cord maybe damaged.
Why won’t the water/solution dispense?
• The pump may have stopped, make sure the on/off switch is set to the ‘I’ position and check
the plug fuse.
• The pump may have stopped. This may be because of overheating due to poor water supply.
Check the water flow rate to your water supply.
• Hose may be blocked or kinked, check for leaks in the hose and clear any blockages.
Straighten out the hose to ensure no kinks and check the hose pipe connections to the tap and
water inlet.
• There may be an air lock. To unlock the trigger safety lock, squeeze the trigger to release water
before the machine is switched on.
• Check assembly of solution application bottle Go to the ‘Operation’ pages. Nozzle/accessory
may be blocked, clear any blockages and clean nozzle Go to the ‘Maintenance’ page.
Why won’t my pressure washer reach operating pressure?
• Hose may be blocked or kinked, check for leaks in the hose and clear any blockages.
Straighten out the hose to ensure no kinks and check the hose pipe connections to the tap
and water inlet.
• Nozzle may be blocked, clear any blockages and clean nozzle.
Go to the ‘Maintenance’ page.
• Remove and clean the water inlet filter Go to the ‘Maintenance’ page.
• Check the water flow rate to your water supply.
FAQs
To access water filter
unscrew water inlet
connector and remove.
Always store tools, power cord and pressure hose into allocated storage slots.
Storage
To remove water filter,
pinch the inner water filter
tab with pliers and gently pull.
Water filter can be
rinsed under running
water periodically.
IMPORTANT:
Always rinse fresh water through your pressure washer and accessories for 1 minute after using solution
to prevent blockages.
IMPORTANT:
Before storing your machine always make sure no water remains in the pressure washer or hose
/accessories to prevent frost damage.
Keep in a dry place above zero degrees and out of the reach of children.
Removing a blockage in the lance and nozzles
To remove the lance from
trigger handle firmly push
and twist the lance
anti-clockwise, when
unlocked pull to remove.
To remove the nozzles press the
nozzle release button and pull.
Insert the nozzle cleaning
tool into the end of lance
and nozzles to remove
any dirt or debris.
WARNING:
Before carrying out any maintenance makesure the machine is switched off and unplugged.
