GETTING TO kNOw yOUR ClEANER
ASSEmBlING yOUR ClEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the button on the hose end and pull.
[1]
2. Connect the hose handle to the upper end of the extension tube
[2]
, or accessories if required.
3. Connect the lower end of the extension tube to the Carpet & Floor nozzle**
[3]
or
accessories if required.
A. Cord Reel Pedal
B.
Exhaust Filter Cover
C. Exhaust Filter
D. Parking slot
E.
On/Off Pedal
F.
Dust Bin Release Button
G. Dust Container Assembly
H. Main Body
I.
Hose
J.
suction Regulator
K.
Hose Handle
L.
Telescopic Tube
M. Telescopic Tube Adjuster
N. Floor Type selector Pedal*
O. & O1. Carpet And Floor Nozzle
(GP)**
O2. Carpet Nozzle
(CA)**
O3. Hard Floor Nozzle
(HF)**
P.
Dust container flap
Q. Dust container flap release button
R.
Dust Container
s.
Multi-cyclone separation unit
T.
Pre-motor filter
U. Dust container cover
V.
2 in 1 Accessory
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergen Remover Mini Turbo Nozzle*
Y.
Parquet Nozzle*
*Certain Models Only ** Certain models only, nozzles may vary according to model
USING yOUR ClEANER
ACCESSORIES AND NOZZlES
O & O1. Carpet And Floor Nozzle
(GP)**
2
GB
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker.
[4]
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjuster
up and raise or lower the handle to the most comfortable cleaning position.
[5]
3. Carpet and Floor Nozzle** - Press the floor type selector on the nozzle
[6]
to select the
ideal cleaning mode for the floor type.
To obtain the best performance and energy efficiency
#1
it is recommended that the
correct nozzles are used for the main cleaning operations. These nozzles are indicated in
the diagrams by the letters
GP
,
HF
or
CA
.
A nozzle type
GP
can be used to clean both carpet and hard floor.
A nozzle type
HF
is suitable for use only on hard floor.
A nozzle of type
CA
is suitable for use only on carpet.
The other nozzles are accessories for specialist cleaning tasks and are recommended for
occasional use only.
It is important to note that this vacuum cleaner is supplied with an Energy Label as required
by European Regulation (EU) 665/2013.
If the label shows a red prohibition circle on the left covering the carpet symbol, then this
indicates that the vacuum cleaner is not suitable use on carpets.
If the label shows a red prohibition circle on the right covering the hard floor symbol, then
this indicates that the vacuum cleaneris not suitable for use on hard floors.
#1
NOTE:
Dust pick up ability carpet, dust pick up ability hard floor, and energy efficiency
in accord with Commission Regulations (EU) 665/2013 and (EU) 666/2013.
All accessories can be fitted to the end of the hose handle or to the end of the telescopic tube.
Hard Floor
– Brushes are lowered to protect the floor.
Carpet
– Brushes are raised for deeper cleaning.
Carpet & Floor Nozzle**: [7]
- Hard floors Cleaning:
Press the pedal on the nozzle on Hard Floor mode and adjust the
slider on the nozzle on ALL FLOORs. In this position brushes, wheels and wiper blade
are lowered to protect hard floors.
[7a]
- Standard Carpet & Rugs Cleaning:
Press the pedal on the nozzle on Carpet mode
and adjust the slider on the nozzle on ALL FLOORs. In this position brushes and wiper
blade are raised while wheels are lowered to allow a perfect ease of movement on such
surfaces.
[7b]
- Deep Carpet cleaning:
Press the pedal on the nozzle on Carpet mode and adjust the
slider on the nozzle on DEEP CARPET CLEANING. In this position brushes, wheels and
wiper blade are raised for a deeper cleaning of your carpet.
[7c]
wARNING: It is recommended to avoid potential scratching of wooden floors that
the pedal is not set on Hard floor mode and the slider on Deep carpet cleaning
4. switch the cleaner on by pressing the on/off Pedal on the cleaner main body.
[8]
5. Adjust the suction regulator on the handle to the desired level.
[9]
6. switch off at the end of use by pressing the on/off Pedal. Unplug and press the cord
reel pedal to wind the power cord back into the cleaner.
[10]
PARkING AND STORAGE SECTION
The tube and the nozzle can be parked on the back of the cleaner for storage or temporary
storage while in use.
[11]
