Hoover HSV-AC2IN1, Instruction Manual

Page: 6 / 64

3
Getting started with your LithiumLife or LithiumLife extended Runtime battery
To bring the battery
to full life, place the
battery onto the
charger.
LithiumLife battery
does not come fully
charged.
When charging, the
charger light will turn
solid blue and the blue
LEDs on the battery
will light up to inidcate
charging progress.
The charger light will
turn off when fully
charged.
If the charger LED
flashes red, an error
has occurred.
Remove and replace.
To remove the battery,
press the blue release
button and lift the
battery while holding
down on the charger
base.
charging the battery Removing the battery
Battery
1. Blue Release Button
2. LED Charge Level Indicator
3. Charge Level Check Button
charger
4. Battery Cavity
5. LED Indicator
25% Charged
50% Charged
75% Charged
It’s ready when you are.
You can leave your battery on the charger–even
after it’s charged.
It cleans powerfully at any charge level.
Whether it’s 25% charged or 100% full, get fade-
free power until the end of the charge.
It’s versatile.
This battery and charger are compatible with the
rest of our LithiumLife family.
Runtime.
Runtime will vary based on the particular
combination of LithiumLife battery model and
FloorMate Cordless or Air Cordless cleaner
products. If using a LithiumLife battery model
different than the battery that came with your Air
Cordless product, runtime differences will occur.
To check the charge
level of your battery,
press the Charge
Level Check Button.
What does it mean when charger light is...
*Images may differ from
actual product.
NOTe:
All LithiumLife batteries are
compatible with FloorMate Cordless and the
entire Air Cordless family of products.
1
4
2
5
3
Solid Blue Battery Charging Progress: 1-3 LEDs
off Fully Charged
Flashing Blue Leave Battery on Charger. It's too hot or cold to charge.
Flashing Red Call our authorized Hoover service center