24
Troubleshooting
Problem
Possible cause
Possible solution
Water tap is closed.
Open the water tap.
Note: Whenever Error is
solved switch of f the
appliance and restart the
program.
Water inlet hose has a kink or
a bend.
Make sure that the position of
the hose is correct.
In case of aqua-stop system:
water protection is triggered;
the marker (C) is red.
The hose must be replaced.
Filter in the water inlet hose
is clogged.
Clean the filter at the inlet
hose connections at tap and
the rear of the appliance.
Water inlet is clogged.
Check water flow from tap.
Water pressure is too low.
Contact your local water
authority.
Anti-flood device is on:
•
There are water leakages in
the appliance.
•
The water inlet valve is
open and blocked.
•
The drainage is blocked.
1.Close the water tap.
2.Disconnect appliance from
power supply.
3.Contact Service.
Error codes on the display
All other Alarmcodes:
1. Note Alarmcode
2. Contact Service ; refer to CUSTOMER SERVICE
Acoustic alarm,
display shows
ALARMCODE E10
The appliance does
not fill with water.
Acoustic alarm,
display shows
ALARMCODE E30
Leak: The drainpump
runs permanently!
Summary of Contents for HDIH 2D1145
Page 1: ...User Manual Dishwasher HDIH 2T1045 HDIH 2D1145 HDIH 2T1145...
Page 30: ......
