Hoover HDIH 2D1145, User Manual

Page: 12 / 30

10
Adjusting the rinse aid dosage
The normal, factory-set dosage level is R3, but you may need to adjust this to suit
your water conditions.
If there is excessive foaming at the end of the wash, reduce the dosage.
If you live in a hard water area or if dishes are wet or streaky after drying,
increase the dosage.
To adjust the rinse aid setting:
If you are using tablets with built-in rinse aid, we recommend setting the rinse
aid dosage level to off (R1).
How to refill the rinse aid dispenser
1.Pull the button to snap the dispenser cover open.
2.Pour rinse aid into the circular opening, making sure not to fill beyond the MAX
marking.
IMPORTANT!
Take care not to spill rinse aid into the dishwasher. Any spills must be wiped up
to prevent excess foaming. Failure to do so may result in a service call, which
will not be covered by warranty.
3.Close the cover, making sure it clicks shut
.
4.Press and hold the button for 3 sec after each refill to reset rinse aid indicator.
Dosage regulator
When to refill the rinse aid dispenser
When rinse aid level becomes low, the digtial will
scrolling display RINSE AID to remind you to
refill the dispensers.
Using rinse aid
We highly recommend using liquid rinse aid regularly to get the best drying
results. Rinse aid gives a streak-free, sparkling clean look to glass and chinaware.
In addition, it prevents metal from tarnishing.