Hoover HBWOS 69TMET-80, Manual

Page: 18 / 32

18
 This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
 This button allows you to change the
temperature of the wash cycles.

It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.

If you want carry out a cold wash all the
indicators must be off.
 By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.

If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.

To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
 It is possible to modify the spin speed
without pausing the machine.
(only available on certain models)

By this option you can add a specific
steam treatment to some washing cycles
(see programme table).

The steam function relaxes the folds and
makes ironing times shorter.
 Fibres are regenerated and refreshed,
removing all smells from the items.

A dedicated steam treatment was devised
for each programme, to guarantee
washing top efficiency depending on item
fabrics and colours.
(only available on certain models)
This function allows you to minimizes
creases as much as possible, eliminating
the intermediate spins or reducing the
intensity of the last one.
 Pressing simultaneously the buttons
TEMPERATURE SELECTION and SPIN
SELECTION for about 3 seconds , the
machine allows you to lock the keys. In
this way, you can avoid making accidental
or unwanted changes if a button on the
display is pressed accidently during a cycle.
KEY LOCK
This option must be selected before
pressing the START/PAUSE button.
EASY IRON button
This option must be selected before
pressing the START/PAUSE button.
ACTIVE STEAM button
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
SPIN SPEED button
TEMPERATURE SELECTION
button