Hoover H-PURIFIER 700, User Manual, Page: 12 / 224

12
HUMIDIFIER MAINTENANCE
;$&/;<=&-###&/$: [ [Fig. 19]
When water level is lower than the minimum level, the display will show REFILL WATER advice and blinks.
•
Remove the Tank Body Housing from the product. [Fig. 19a]
• Remove the Tank Assembly from the Tank Body Housing. [Fig. 19b]
• Fill the tank through the water tank inlet with distilled water until it reaches the MAX line indicated
on the tank.
[Fig. 19c]
• )5 *5 *&! [Fig. 19d]
• )5 *&‹! [Fig. 19e]
;$&/;<= #&;<#&/$: [ [Fig. 19]
‰&@‹ !* CLEAN WATER TANK
action is required to clean the water tank.
•
Remove the Tank Body Housing from the product. [Fig. 19f]
• Seperate the Water Tank Housing, Water Tank and Water Tank Cover and clean all 3 thoroughly and dry completely with a soft dry cloth. [Fig.
19g,h,i]
• )@ / 5 $*– !
• )/ 5 &!
[Fig. 19e]
STORAGE OF YOUR H-PURIFIER
1. X*‹ !
2. 1 6 *‹6 / 5 5 9!
3. )!) !1
unit and Diffuser Cover.
4. Ensure all components are dry.
5. Remove the Air Inlet Cover [Fig. 20a] and Reel in the power cord by pulling on the cord [Fig. 20b] !
[Fig. 20c,d] ) [Fig. 20e]
6. X*‹ !
Fig. 19
Fig. 20
GB