7
EN
USING YOUR CLEANER
Power supply -
Pull cord and plug into power supply (P4), Please make sure the cord is fully
extended before using the cleaner (do not pull the cord beyond the red marker). Press the on/off
pedal once to start the cleaner (P5). Press it again to stop the cleaner before removing the plug
after use. Press the cord rewind button to wind the power cord back into the cleaner (P6).
Fixed power control (depending on model)
– Adjust the suction by moving the handle valve:
suction will decrease when opening the valve (P7). Use low suction for delicate fabrics.
Variable power control (depending on model)
– Slide the variable power adjuster to increase
or decrease the power level (P8). Use low suction for delicate fabrics.
Telescopic Tube / Telescopic Tritube (depending on model)
– The Telescopic Tube or Tritube
can be extended or collapsed by pressing the latches forward and pulling or pushing the tubes to
the desired length (P9).
Carpet & Floor Nozzle
– Press pedal on the nozzle to lower the brush head when cleaning hard
ƀQQTU22TGUUVJGRGFCNCICKPVQNKHVVJGDTWUJJGCFYJGPENGCPKPIECTRGVU
Mini Turbo Nozzle (depending on model)
– Use the Mini Turbo Nozzle (P11) for deep cleaning
on textile surfaces. Important: do not use the Mini Turbo Nozzle on rugs with long fringes, animal
hide and with carpet piles deeper than 15mm. Do not keep the nozzle stationary while the brush is
rotating.
Multifunction Tool
– (P12) This tool can be used as:
Crevice tool: for corners and hard to reach areas.
1.
Dusting brush: for bookshelves, frames, keyboards etc.
2.
Furniture Nozzle (depending on model)
– For soft furnishings and fabrics (P12).
Parking and storage
– The Telescopic Tube or Tritube can be parked for temporary storage dur-
KPIENGCPKPIQTKPVJGUVQTCIGRQUKVKQPYJGPPQVKPWUG22
Nanopack Storage System (depending on model)
Ō6JGWPKSWG0CPQRCEM5VQTCIG5[UVGOCN
-
NQYUVJGENGCPGTVQDGUVQTGFKPCPWNVTCEQORCEVEQPſIWTCVKQPYKVJCUKIPKſECPVN[UOCNNGTUVQTCIG
volume than other cleaners.
To store the cleaner using the Nanopack system:
&GVCEJVJGƀQQTPQ\\NGCPFJQUGJCPFNGHTQOVJG6TKVWDGVJGPEQNNCRUGVJG6TKVWDGVQKVU
1.
minimum storage length (see ‘Telescopic Tritube’).
Position the cleaner in the upright position and slot the tool storage bracket on the Tritube into
2.
the recess located on the base of the cleaner (P15).
9TCRVJGJQUGCTQWPFVJGRTQFWEVDGHQTGſVVKPIVJGJQUGJCPFNGCPFƀQQTPQ\\NGKPVQVJG
3.
locations provided on the tool storage bracket (P16).
0565_5319 Freespace ML IM.indd 7
20/01/2009 12:59:14
Summary of Contents for Freespace TFS-8205
Page 2: ...P1 P3 P5 P7 P2 P4 P6 P8 0565_5319 Freespace ML IM indd 2 20 01 2009 12 59 12 ...
Page 3: ...P9 P11 P13 P15 P10 P12 P14 P16 0565_5319 Freespace ML IM indd 3 20 01 2009 12 59 12 ...
Page 4: ...P17 P19 P21 P23 P18 P20 P22 P24 0565_5319 Freespace ML IM indd 4 20 01 2009 12 59 13 ...
Page 5: ...P25 P27 P28 P26 0565_5319 Freespace ML IM indd 5 20 01 2009 12 59 14 ...
