background image

4. If you have a
problem

If a minor problem occurs it usually can
be solved quite easily when the cause is
found by using the check list below.

Possible cause

Possible solution

• Not firmly plugged in

Plug in firmly

• No voltage in wall plug

Check fuse or breaker

• Blown fuse/tripped breaker

Replace fuse/reset breaker

Possible cause

Possible solution

• Brushes and pads not properly

attached.

Attach brushes properly.

• Accumulation of wax on felt 

pads.

Wash and dry pads thoroughly.

7

Accessories

(Available at additional cost from Hoover
Dealers (Depots), Hoover Factor y
Service Centers, by filling out the
enclosed order form or through The
Hoover Company on-line at 
www.hoovercompany.com

Lubrication

The motor is equipped with two sleeve
bearings.  These bearings contain suffi-
cient lubrication for the life of the motor.
The addition of lubricant could cause
damage.  

Therefore, do not add lubri-

cant to either motor bearing.

Servicing of double-
insulated appliances

This appliance is double-insulated.  In a
double-insulated appliance, two systems
of insulation are provided instead of
g rounding.  No grounding means is pro-
vided on a double-insulated appliance,
nor should a means for grounding be
added.  Servicing a double-insulated
appliance re q u i res extreme care and
knowledge of the system, and should be
done only by qualified service personnel.

Replacement parts must be identical to
those parts being replaced.

A double-

insulated appliance is marked with the
w o rds “DOUBLE-INSULATION” or “DOU-
BLE INSULATED”.  The symbol       
may also be marked on the appliance.

Problem: Floor machine does not 

glide easily

Service

To obtain approved HOOVER service
and genuine HOOVER parts, locate the
nearest

Hoover Factory Service Center

or Authorized Hoover Warranty
Service Dealer (Depot)

by:

• checking the Yellow Pages under 

“Vacuum Cleaners - Household” 
OR

• checking the list of Factory Service 

Centers provided with this cleaner 
OR -

• calling 

1-800-944-9200

for an 

automated referral of authorized 
service outlet locations (U.S. only) 
OR - 

• checking the Service section of 

The Hoover Company on-line at 

www.hoovercompany.com

Please do not 

send your cleaner to The

Hoover Company in North Canton for
service, this will only result in delay.

If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720 Phone:  330-499-9499.

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8, 
Phone: 1-800-263-6376.

Always identify your cleaner by the

complete

model number when request-

ing information or ordering parts.  (The
model number appears on the rear
wheel cover.)

Problem: Floor machine won’t run

Steel wool pads

for applying solvent-

base paste wax.  Snap on over power
s c rub and cleaning bru s h e s .

Heavy duty cleaning and waxing pads
(yellow)

snap on over power scrub and

cleaning brushes for cleaning and
applying paste wax.

Soft cl

oth pads (beige) 

snap on over

power scrub and cleaning brushes for
periodic restoration of polyurethane
sealed hard wood and sealed laminate

High luster pads

for polishing  floors.

Snap on over power scrub and cleaning
brushes.

Summary of Contents for FloorMAX Hard Floor Machine









Reviews: