EN
15
l
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
l
During the phase in which the water is
held in the tub, the relevant indicator light
blink to show that the machine is at a
standstill.
l
Deselect the option to end the cycle with
a spin dry (which may be reduced or
cancelled using the appropriate button)
and emptying phase.
l
Thanks to electronic control, the water in
the intermediate phases is emptied
silently, making this option very useful for
washing at night.
l
Pressing simultaneously the buttons
NIGHT & DAY
and
DELAY START
for
about
3 seconds
, the machine allows
you to lock the keys.
In this way, you can avoid making
accidental or unwanted changes if a
button on the display is pressed
accidently during a cycle.
l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or by pressing the
ON/OFF
button
(for at least
1 second
).
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
2
13 14
1
6
15
10
12
5
7 7
7
7
7
8
9
4
11
3
1) DOOR LOCKED INDICATOR LIGHT
l
The indicator light is illuminated when the
door is fully closed.
l
When
START/PAUSE
is pressed on
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
l
A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for 2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out
before opening the door. At the end of the
cycle turn the programme selector to
OFF
.
If you accidently select a memorized
program, simply turn the program
knob to select another one.
NIGHT & DAY button
KEY LOCK
Digital Display
Close the door BEFORE selecting the
START/PAUSE button.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door
in the proper way and press the
START/PAUSE button.
