- 7 -
- 7 -
* Features vary according to model
CLEANING THE FILTERS*
Washing filter and foam:
Washing pre-motor and exhaust filter:
Rotate the BLUE filter pack until the unlock
position to release it from the dust container.
The pre-motor filter should be washed every three
months.
The Carbon filter is normally maintenance free, this
component should not be washed. If a replacement
is required please contact our spares department.
The exhaust filter should be washed every month.
Press down on the latch to remove the exhaust cover
and filter.
IMPORTANT: For optimum cleaning performance, always keep
your filters clean.
!
Separate the GREY foam filter from the BLUE
filter pack using the tab provided.
Wash the GREY foam filter thoroughly.
Gently tap to release excess dust. Wash the
filter with the BLUE housing from the inside.
DO NOT USE HOT WATER OR
DETERGENTS!
Remove excess water by shaking and leave
to dry for 24 hours. Refit filters only when
completely dry.
Do not use a brush as this will damage the
filter.
Remove excess water by shaking and leave to dry for
24 hours. Refit filters only when completely dry.
Wash filters under hand warm water.
DO NOT USE HOT WATER OR DETERGENTS!
0565-5289.indd 7
28/11/2007 15:43:27
