Hoover DUST MANAGER User Instructions Download Page 5

- 5 -

CLEANING TOOLS*

CLEANING THE STAIRS

!

IMPORTANT:  When using cleaning tools, the cleaner must be kept 

in the upright (parked) position, particularly when cleaning stairs.  

The carpet height selector should also be set to tool mode:

It is dangerous to place the cleaner above you whilst 

cleaning the stairs. 

ALWAYS work with the cleaner below you. Ensure it is 

positioned up against the bottom step. 

DO NOT attach hose retainer when cleaning the stairs.

- 5 -

* Features vary according to model

ALWAYS

 attach hose retainer to hook when using cleaning tools.

Unhook after use.

Pet Hair & Allergen Remover * (Certain 
models only)
Ideal for removing pet hairs.
Do not touch the rotating brush.

Telescopic Tube*
Fitted on the flexible hose and with accessories
at its end, it is ideal for stair cleaning.

It extends to minimise stretching and bending.

All accessories can fit on the end of the flexible 

hose. Combine accessories depending on use.

STAIR STABILISER* 

The Stair Stabiliser has been designed to improve cleaner stability when you 

pull on the hose while stair cleaning.  It can be adjusted to suit any staircase. 

Location

The Stabiliser, stability device, is located 
at the back of the cleaner.

Pull the bottom of the device to release 
it from its storage position.

Operation

Lift the device upwards to the position 
shown in the diagram.
Simultaneously squeeze the finger tabs 
and extend the device.

Use

Place the cleaner against the stairs 
and the Stair Stabiliser in the position 

shown.  Use the stair cleaning hose and 
accessories as usual.
To return the cleaner to carpet mode 

repeat the above process in reverse.

 

*

*

0565-5289.indd   5

28/11/2007   15:43:24

Summary of Contents for DUST MANAGER













Reviews: