background image

6. WALL/FLOOR BRUSH

7. HOSE CORD CONNECTION TO CLEANER 

Plug hose cord into

cleaner base to receptacle.

8. CASTERS 

Provide easier towing; pull cleaner using hose to guide

the cleaner easily over carpet, throw rugs, and door sills.

9. ON-OFF SWITCH 

A convenient switch is located near front of cleaner.

10. CORD STORAGE HOOKS

II. EXTENSION WANDS 

Connect to hose and Powermatic nozzle or

cleaning tools.

12. COVER LATCH

13. CARRYING HANDLE

14. CREVICE TOOL

15. FURNITURE NOZZLE

16. HANDLE ADJUSTMENT LATCH 

Step on the handle adjustment

latch to lower the handle.

17. CORD CLIPS 

Clip nozzle cord to extension wands.

18. SUCTION REGULATOR 

Close regulator for full suction. Open

regulator for easy cleaning of some types of carpets, lightweight
flexible rugs and lightweight draperies.

19. NOZZLE CORD CONNECTION TO HANDLE 

Plug nozzle cord

into receptacle underneath handle.

20. PLASTIC LATCH RING 

Connects hose grip to extension wand or

to cleaning tools.

21. HOSE GRIP

OPERATE CLEANER ONLY AT VOLTAGE SPECIFIED ON DATA
PLATE ON BOTTOM OF CLEANER.

WARNING: ELECTRICAL SHOCK COULD OCCUR IF USED OUT-

D O O R S   O R   O N   W E T   S U R F A C E S .

4

 

Summary of Contents for Celebrity II S3083-030





















Reviews: