Useful advice for users
Tips on using your domestic appliance in the most environmentally-friendly and economical way
Do a full load in your washing machine
To prevent any possible waste of energy, water or detergent we recommend that you
put a full load in your washing machine, not exceed the maximum load size.
Save up to 50% energy by washing a full load instead of 2 half loads.
When is prewashing really needed?
Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the
prewash option for normally soiled laundry.
Which wash temperature should you choose?
Using stain removers before machine washing reduces the need to wash at temperatures
over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature.
ARIEL - Chosen and recommended by Hoover
When we produce a new washing machine we subject it to every test possible. And one of the
most important tests is the one that enables our experts to identify the most suitable detergent
for solving laundry problems. Ariel was able to meet our needs: to make the washing machine
function efficiently, not compromise the machine.s lifespan and produce the best wash results.
Consistently excellent results, which was the main aim of the test we carried out, determined
our choice and our recommendation. The prime function of a detergent that answers all
washing requirements is to work with the water to remove dirt from fabrics, holding it in
suspension until it is removed when the water is pumped out, and to control the amount of
foam forming in the washing machine, without damaging the fibres of the items being washed.
Ariel fully satisfies all these requirements, as it contains high quality elements, the result of the
most advanced research, ensuring excellent results under all conditions.
After washing
–
Wait about two minutes for the door locking device
to disengage (only if door locked indicator is ON) for
the door locking device to disengage
–
Switch off the machine by turning the control knob
to the STOP position
–
Open the door and remove the laundry
Note: Please ensure that Inter@ct set-up, installation
and testing has been completed before referring to the
Quick Start.
When in transit never rest the porthole against the trolley.
M) N.B!
If the appliance is installed on a carpeted floor ensure that the ventilation holes on the
base of the appliance are not obstructed.
N) The appliance should be lifted by two people.
O) If the appliance is not running properly or breaks down, switch it off, turn off the tap and
do not tamper with the appliance.
Consult only the Authorised Technical Support Service for possible repair and ask them to
use original spare parts.
Failure to comply with the above can compromise the safety of the appliance.
P) If the appliance’s power cable should ever need replacing, consult the Authorised
Technical Support Service.
Q) After the machine has been installed, ensure that the mains plug and water supply valves
are easily accessible.
R) Glass fibre curtains should never be put into this machine.
S) Lint or fluff must not be allowed to collect on the floor around the outside of this machine.
T) Always ensure that the door locked indicator neon has switched itself off before opening
the door. By doing so the machine is allowed to cool down before the laundry is handled.
U) Always ensure that the base panel is fitted to the machine.
Quick Start
Washing
– Open the door with the DOOR OPEN button (DRZWI).
– Select laundry and put it in the machine.
– Close the door.
– Put detergent in the dispenser compartments, compartment I for pre wash and
compartment II for all other programmes.
– Select programme by turning the programme knob (Your desired programme may be
seen on the display).
– Select any function buttons required and then press the Start/Pause button (START/PAUZA).
– There may be a short time delay from pressing the start/pause bottom to the start of
theprogramme, while the machine senses the water required and sets the parameters for
the programme.
39
38
