background image

The Control Panel

Turning the Machine On

Pressing the ON/OFF (     ) button will turn the machine on.

Start Pause Button

START

After selecting the programme and the required options press the Start Pause button

once to start the wash cycle. There will be a short time delay to the start of the 

programme while the machine sets the wash parameters for the selected programme

and options. The Door Locked and KG Mode indicator lights will also illuminate a few

seconds after pressing the Start Pause button.

In some programs in the initial phase of the cycle there are planned spin sequences to

ensure optimal wash results. 

PAUSE

The programme may be paused at any time during the wash cycle by holding down

the Start Pause button for about two seconds. The door locked indicator light will

remain illuminated for approximately 2 minutes. The door can be opened when this

indicator goes out. To restart the programme, press the Start Pause button once again.

Cancelling and Changing the Programme

To cancel the programme hold down the START/PAUSE button for about five seconds.

Select a new programme and start as detailed above.

Temperature

Button

15

LCD

Display

Delay Start

Button

Start/Pause

Button

On/Off

Button

Night 

& Day

Stain

Blaster

Sensitive

Care

Pre

Wash

Rinse 

Hold

Easy Iron

Wash Time

Button

Programme

Buttons

Spin Speed 

Button

Description of the Machine

The Hoover washing machine details are indicated below:

Detergent

Dispenser

Control

Panel

Door

Handle

Porthole

Door

Filter

Adjustable

Feet

14

Summary of Contents for 11146P8CH






















Reviews: