2/2
2. Attach the Center Support (P) to the slat using 2 Bolts (M), 2 Lock Washers (O) and 2 Flat Washers
(N) securing the Bolt (M) by Allen Wrench (L) as shown in Diagram 2.
L
M
N
O
P
Diagram 2
3. Attach the Slats (D) to the Side Rails (C), align the holes pre-drilled on the slat with the holes on the
cleat on the Side Rail (C), turn the Screws (K) and tighten it, see Diagram 3.
C
D
K
Diagram 3
Note: You can change the height of the slat by adjusting the height of the cleat on the side rail as shown
in diagram 4, remove the Bolt (Q), Lock Washer (V) and Flat Washer (U) from the cleat by turning
the Bolt (Q) with Allen wrench (R) in anti-clockwise direction, adjust the cleat to a desired position,
and then secure the lock washer, flat washer, bolt in a clockwise direction by turning with Allen
wrench.
