4/5
Diagram 6 Diagram 7 Diagram 8
2. Assemble stretchers(V) to rails(X&W), align pre-drilled holes on rails to holes on the stretchers,
using bolts(T), lock washers(R), secure all bolts with allen wrench(P) in a clockwise
direction(See Diagram 9).
Diagram 9
3. Align holes(V) on top side of stretchers to holes on center connector(Z), secure bolts(T), lock
washers(R) by using allen wrench(P) in a clockwise direction(See Diagram 10), Screw finial(Y)
through center connector(Z) in a clockwise direction by hand. The longer side of the center
connector is 2 1/3”, this side is paralleled to rail(X), the shorter side of the center connector is 2
1/8”, and it is paralleled to rail(W).
Diagram 10
