Hoobico FLW4090, Building And Operating Instructions

Page: 5 / 16

5
ENGLISH
OPTIONAL SUPPLIES AND TOOLS
Here is a list of optional tools mentioned in the manual that
will help you build the Edge 540-M.
❍
Great Planes CG Machine™ (GPMR2400)
❍
Top Flite® Precision Magnetic Prop Balancer™ (TOPQ5700)
❍
Straightedge with scale (HCAR0475)
❍
Cutting mat (HCAR0456)
❍
Masking Tape (TOPR8018)
❍
CA Applicator Tips (GPMR6033)
❍
CA Debonder (GPMR6039)
❍
CA Accelerator (GPMR6034)
❍
Milled Fiberglass (GPMR6165)
❍
Microballoons (TOPR1090)
❍
R/C-56 Canopy Glue (JOZR5007)
❍
Epoxy Brushes (GPMR8060)
❍
Mixing Sticks (GPMR8055)
❍
Threadlocker (GPMR6060)
❍
Denatured Alcohol (for epoxy clean up)
❍
Hobby Knife (HCAR0105), #11 Blades (HCAR0211)
❍
Non-elastic monofilament or Kevlar fishingline (for stab
alignment)
❍
Builders Triangle Set (HCAR0480) (for fin alignment)
❍
Easy-Touch™ Bar Sander (GPMR6170, or similar)
❍
Felt-Tip Marker (TOPQ2510)
❍
Small metal file
❍
Rotary tool such as Dremel®
❍
Rotary tool reinforced cut-off wheel (GPMR8200)
❍
Curved Tip Canopy Scissors for trimming plastic parts
(HCAR0667)
❍
Dead Center™ Engine Mount Hole Locator (GPMR8130)
❍
Great Planes AccuThrow™ Deflection Gauge (for
measuring control throws, GPMR2405)
KIT CHECK
Before starting to build, use the Kit Contents list to take an
inventory of this kit to make sure it is complete and inspect the
parts to make sure they are of acceptable quality. If any parts
are missing or are not of acceptable quality, or if you need
assistance with assembly, contact Revell Product Support.
Service-Center Revell GmbH
Henschelstr. 20-30, 32257 Bünde, Germany
Tel: +49 5223 - 965 0
Email: Hobbico-Service@Revell.de
SPARE PARTS
Support, but can be purchased from hobby shops or mail
order/Internet order firms. Hardware items (screws, nuts,
bolts) are also available from these outlets. If you need assis-
tance locating a dealer to purchase parts, contact Product
Support.
ASSEMBLING THE LANDING GEAR
Put the wheelshaft together with the distance shim the lock
ring and the safety nut to the landing gear. Dont lock the nut
at this time.
After merging the wheel pant between landing gear and
hexagon of the shaft, you can lock the M4 nut.
It is important, that the wheel pant is positioned between the
landing gear and the hexagon of the wheel shaft.