__________________________________________________________________________________________________
_____________________________________________________________________________________
8/17
U398_UVATP_B_e_190425
Operating Instructions Transducer UVATP
in AS102 Housing
6.2.3 Temperature sensor Pt100
6.2.4 Absolute pressure sensor 4 ... 20 mA
The initial value (4 mA) and the terminal value (20 mA) can be configured with the PC software UCOM via
the RS232 interface. Customer-specific programmed values can be found in the accompanying documents.
6.2.5 Analog outputs A1 and A2
All relevant information can be found on the type plate.
The terminal value of the analog outputs can be configured with the PC software UCOM via the RS232
interface. Customer-specific programmed values can be found in the accompanying documents.
Output signals are electrically isolated from the power supply. Optionally, both 4 ... 20 mA outputs can be
isolated with each other and from the inputs using an additional isolating amplifier.
Pt100 in 4-wire system
Absolute pressure sensor 4...20 mA 2-wire
system
4 ... 20 mA
resistance max. 500 Ohm
optional 0 ... 10 V
impedance 1 kOhm
