__________________________________________________________________________________________________
______________________________________________________________________________________
U327_UFAUVALDG16_B_e_170808
www.hoentzsch.com
3/15
1 Safety Symbols
Warning!
Failure to observe the instructions can result in serious injury and damage to property!
Important notice!
Non-observance can result in serious damage to the equipment or restriction in performance!
2 Application according to Regulations
Transducers UFA and UVA are instruments for measuring flow velocity and flow rate:
UFA for use with vane wheel flow sensors FA or FAR and measuring tubes FA Di or FAR Di and UVA for use
with vortex flow sensors VA40 and measuring tubes VA Di. These instruments are designed for industrial
application. The LDG16 is a mounting rail housing in protection class IP20 designed primarily for use in
control cabinets.
The manufacturer is not liable for damage caused by improper use and/or non-compliance with the regula-
tions.
Do not carry out any structural modifications to the transducers.
Always follow the instructions on the type plate, especially the information regarding supply voltage.
3 Operating Safety
All steps described below must be carried out by qualified personnel only!
Please read the Operating Instructions carefully before unpacking the equipment!
Safety can only be guaranteed if the equipment is operated in accordance with the regulations. Improper
handling can result in serious injury and damage to property.
4 Scope of Delivery
- Transducer UFA or UVA for mounting rail assembly
- Operating Instructions, Data Sheet
- CD-ROM with PC configuration software UCOM (optional)
- Interface cable RS232 for PC COM port connection (optional)
- USB adapter in addition to the interface cable RS232 (optional)
Please check that everything listed in the Delivery Note / Technical Data Sheet is included in the delivery.
